Age | Commit message (Collapse) | Author |
|
git-svn-id: https://pugixml.googlecode.com/svn/trunk@1054 99668b35-9821-0410-8761-19e4c4f06640
|
|
When xpath_string is heap-allocated we always know the length of the
string at some point - it is now stored in the object. This reduces
redundant string length calculations and makes string_value() much faster
in case it has to concatenate strings.
git-svn-id: https://pugixml.googlecode.com/svn/trunk@1053 99668b35-9821-0410-8761-19e4c4f06640
|
|
translate() with constant arguments now uses a 128-byte table and a table
lookup instead of searching characters in the source string. The table is
generated during query optimization.
git-svn-id: https://pugixml.googlecode.com/svn/trunk@1052 99668b35-9821-0410-8761-19e4c4f06640
|
|
git-svn-id: https://pugixml.googlecode.com/svn/trunk@1051 99668b35-9821-0410-8761-19e4c4f06640
|
|
Node ancestor search now terminates early if ancestor is found before the
document root (only happens if nodes were at the same depth).
Sibling search now steps synchronously for left and right nodes to avoid
worst-case performance when we go in the wrong direction and have to scan
a big list (this comes at the cost of average performance since in the
best case we do 2x more operations).
Node comparison is now done using node pointers to elide some null
comparisons since the structure of the search guarantees that they are
handled properly.
All of the above results in ~2x faster document order comparison on
complex documents.
git-svn-id: https://pugixml.googlecode.com/svn/trunk@1050 99668b35-9821-0410-8761-19e4c4f06640
|
|
XPath evaluation frequently produces sequences that are sorted but are not
tagged as such (area for improvement...). Doing a linear scan before
sorting is cheap and results in tremendous speedup for already sorted
sequences (especially if document_buffer_order optimization does not
apply).
git-svn-id: https://pugixml.googlecode.com/svn/trunk@1049 99668b35-9821-0410-8761-19e4c4f06640
|
|
While gcc and clang can eliminate dependency on s in the inner loop of
PUGI__SCANWHILE_UNROLL, MSVC emits a series of register increments.
Rewriting the code to explicitly remove the dependency keeps similar
codegen on gcc/clang but improves codegen on MSVC for a 10% performance
boost.
Also use unrolled scanning in text_output_escaped (2% faster).
git-svn-id: https://pugixml.googlecode.com/svn/trunk@1048 99668b35-9821-0410-8761-19e4c4f06640
|
|
git-svn-id: https://pugixml.googlecode.com/svn/trunk@1047 99668b35-9821-0410-8761-19e4c4f06640
|
|
The page no longer contains 'data' field to use sizeof everywhere instead
of offsetof/sizeof inconsistency (that is required because some compilers
don't recognize offsetof as compile-time constant).
The page no longer contains 'memory' field that is now encoded as an
offset byte before the page - this allows us to save one pointer from the
static page in the document to keep the size the same as in v1.2 (binary
compatibility).
git-svn-id: https://pugixml.googlecode.com/svn/trunk@1046 99668b35-9821-0410-8761-19e4c4f06640
|
|
Use the same flag that is used for marking name/value in nodes/attributes
as shared. This reduces document structure size and makes some amount of
sense (although admittedly is a bit of a hack).
We need to bring document _memory size back down to 192 bytes and this is
the first step.
git-svn-id: https://pugixml.googlecode.com/svn/trunk@1045 99668b35-9821-0410-8761-19e4c4f06640
|
|
Also fixes PUGIXML_NO_STL compilation and makes it possible to build with
any version of new Windows SDK.
git-svn-id: https://pugixml.googlecode.com/svn/trunk@1044 99668b35-9821-0410-8761-19e4c4f06640
|
|
xml_node objects carry an overhead since they perform NULL checks - in
case of copying a hierarchy we know that we only traverse valid nodes so
we don't need to do this. This makes copyless copy 16% faster.
git-svn-id: https://pugixml.googlecode.com/svn/trunk@1043 99668b35-9821-0410-8761-19e4c4f06640
|
|
git-svn-id: https://pugixml.googlecode.com/svn/trunk@1042 99668b35-9821-0410-8761-19e4c4f06640
|
|
Also remove accidentally committed pragma pack :-/
git-svn-id: https://pugixml.googlecode.com/svn/trunk@1041 99668b35-9821-0410-8761-19e4c4f06640
|
|
git-svn-id: https://pugixml.googlecode.com/svn/trunk@1040 99668b35-9821-0410-8761-19e4c4f06640
|
|
pointer alignment
git-svn-id: https://pugixml.googlecode.com/svn/trunk@1039 99668b35-9821-0410-8761-19e4c4f06640
|
|
git-svn-id: https://pugixml.googlecode.com/svn/trunk@1038 99668b35-9821-0410-8761-19e4c4f06640
|
|
git-svn-id: https://pugixml.googlecode.com/svn/trunk@1037 99668b35-9821-0410-8761-19e4c4f06640
|
|
This bypasses the allow_insert check (which is redundant for copying since
we're mirroring an existing node structure that must be valid) and does
not cause an extra allocation for new declaration nodes. Overall results
in 15% faster copying,
git-svn-id: https://pugixml.googlecode.com/svn/trunk@1036 99668b35-9821-0410-8761-19e4c4f06640
|
|
git-svn-id: https://pugixml.googlecode.com/svn/trunk@1035 99668b35-9821-0410-8761-19e4c4f06640
|
|
Moving nodes results in node order being different from order of allocated
names/values; since move is O(1) we can't mark the moved nodes in a
subtree so we have to disable the optimization for the entire document.
Similarly, if a node is composed of multiple buffers, comparing nodes in
different buffers does not result in meaningful order.
Since we value correctness over performance, mark the entire document in
these cases to disable sorting optimization.
git-svn-id: https://pugixml.googlecode.com/svn/trunk@1034 99668b35-9821-0410-8761-19e4c4f06640
|
|
git-svn-id: https://pugixml.googlecode.com/svn/trunk@1033 99668b35-9821-0410-8761-19e4c4f06640
|
|
Now copying nodes or attributes does not copy names/values if the source
strings are in a document buffer. As a result, several nodes can now share
the same string in document buffer - to support this we 'taint' both
source and destination with a special 'shared' bit.
Tainting disables offset_debug() and fast-path document order comparison;
it also prevents strcpy_insitu from reusing the document buffer memory for
the copied node.
The downsides include slower XPath queries in some (rare) cases and
slightly higher memory consumption in some (rare) cases.
XPath queries can execute slower if a lot of old nodes were copied to new
nodes *and* a query only touches old nodes (so it used to benefit a lot
from fast comparison path) *and* a query produces unsorted node sets that
need to be sorted later (both are relatively rare).
Higher memory consumption is possible if a lot of nodes were copied and
all nodes (both new and old) have their contents modified 'in place' --
previously we could modify the old node in place and the new node required
one allocation on copy, and now both nodes have to have their data
allocated during modification. This should also be rare.
On the bright side, in a lot of cases copying of string data can be
avoided - this makes the copy much faster and the document now occupies
less memory. For example, some uses of append_buffer are now actually slower
compared to building up a document by copying a template from the same
document and modifying the copy slightly.
In one of the internal benchmarks copying is now 4x faster (the difference
can be more dramatic with more string contents and less markup).
git-svn-id: https://pugixml.googlecode.com/svn/trunk@1032 99668b35-9821-0410-8761-19e4c4f06640
|
|
This is required to make it possible to use a pointer to one of the
buffers with the document data in nodes but keep offset_debug and (more
importantly) XPath document order comparison optimization working.
The change increases memory page alignment to 64 bytes (so requires +32
bytes for every page allocation, which should not be a problem - even with
non-default 4k pages this is <1% extra cost, with default 32k pages the
overhead is 0.1%)
git-svn-id: https://pugixml.googlecode.com/svn/trunk@1031 99668b35-9821-0410-8761-19e4c4f06640
|
|
git-svn-id: https://pugixml.googlecode.com/svn/trunk@1030 99668b35-9821-0410-8761-19e4c4f06640
|
|
Since xml_node/attribute are pointer wrappers it's cheaper to pass them by
value. This makes XPath evaluation 4% faster and node printing 2% faster.
git-svn-id: https://pugixml.googlecode.com/svn/trunk@1029 99668b35-9821-0410-8761-19e4c4f06640
|
|
This test has previously caused a stack overflow on x86/MSVC.
git-svn-id: https://pugixml.googlecode.com/svn/trunk@1028 99668b35-9821-0410-8761-19e4c4f06640
|
|
This makes node copying 6% faster, prevents it from ever running out of
stack space and makes the profiling results more actionable for profilers
that can't merge information from recursive calls.
git-svn-id: https://pugixml.googlecode.com/svn/trunk@1027 99668b35-9821-0410-8761-19e4c4f06640
|
|
Include range/iterator.hpp to avoid compatibility issues in the future.
git-svn-id: https://pugixml.googlecode.com/svn/trunk@1026 99668b35-9821-0410-8761-19e4c4f06640
|
|
Renames write to write_string and write_buffer to make it easier to
distinguish between them in profiling runs and commit messages...
git-svn-id: https://pugixml.googlecode.com/svn/trunk@1025 99668b35-9821-0410-8761-19e4c4f06640
|
|
Make it easier for the compiler to generate good code by loading bufsize
into a local once and returning new offset from flush(). This results in
7% performance gain.
git-svn-id: https://pugixml.googlecode.com/svn/trunk@1024 99668b35-9821-0410-8761-19e4c4f06640
|
|
Instead of computing the length and doing memcpy we now copy the head of
the string into the buffer (like strcpy) and then use memcpy for tail if
necessary. This results in 10-15% speedup for writing typical documents with
a mix of short and long strings.
git-svn-id: https://pugixml.googlecode.com/svn/trunk@1023 99668b35-9821-0410-8761-19e4c4f06640
|
|
git-svn-id: https://pugixml.googlecode.com/svn/trunk@1022 99668b35-9821-0410-8761-19e4c4f06640
|
|
//name means /descendant-or-self::node()/child::name, but we frequently
can replace it with /descendant::name. This means we do not have to build
up a temporary node set with all descendants that can lead to 3x speedups.
git-svn-id: https://pugixml.googlecode.com/svn/trunk@1021 99668b35-9821-0410-8761-19e4c4f06640
|
|
git-svn-id: https://pugixml.googlecode.com/svn/trunk@1020 99668b35-9821-0410-8761-19e4c4f06640
|
|
git-svn-id: https://pugixml.googlecode.com/svn/trunk@1019 99668b35-9821-0410-8761-19e4c4f06640
|
|
We now precompute indent length and have a fast path for lengths 0..4 that
avoids calling memcpy in a tight loop. This makes node output 20-30%
faster if indentation is enabled.
git-svn-id: https://pugixml.googlecode.com/svn/trunk@1018 99668b35-9821-0410-8761-19e4c4f06640
|
|
git-svn-id: https://pugixml.googlecode.com/svn/trunk@1017 99668b35-9821-0410-8761-19e4c4f06640
|
|
git-svn-id: https://pugixml.googlecode.com/svn/trunk@1016 99668b35-9821-0410-8761-19e4c4f06640
|
|
This test previously caused a stack overflow on x86/MSVC.
git-svn-id: https://pugixml.googlecode.com/svn/trunk@1015 99668b35-9821-0410-8761-19e4c4f06640
|
|
This makes node output 3% faster, prevents it from ever running out of
stack space and makes the profiling results more actionable for profilers
that can't merge information from recursive calls.
git-svn-id: https://pugixml.googlecode.com/svn/trunk@1014 99668b35-9821-0410-8761-19e4c4f06640
|
|
git-svn-id: https://pugixml.googlecode.com/svn/trunk@1013 99668b35-9821-0410-8761-19e4c4f06640
|
|
- Include GNUInstallDirs which sets up standard install locations including
lib64 for mulilib systems.
- Make BUILD_SHARED_LIBS an option instead of a variable which is better for
use in either the cmake-gui or ccmake gui interfaces.
- Setup a destination for WIN32 runtime DLL's which is also helpful for MinGW
installs.
git-svn-id: https://pugixml.googlecode.com/svn/trunk@1012 99668b35-9821-0410-8761-19e4c4f06640
|
|
Fixes C4458: declaration of 'var' hides class member
git-svn-id: https://pugixml.googlecode.com/svn/trunk@1011 99668b35-9821-0410-8761-19e4c4f06640
|
|
git-svn-id: https://pugixml.googlecode.com/svn/trunk@1010 99668b35-9821-0410-8761-19e4c4f06640
|
|
git-svn-id: https://pugixml.googlecode.com/svn/trunk@1009 99668b35-9821-0410-8761-19e4c4f06640
|
|
|
|
Use a special macro that unrolls the loop body and uses static branch prediction
to improve code generation.
This increases performance across all data sets from benchmark; clang x64 is 10%-40%
faster, clang x86 is 5%-20% faster, msvc is 5%-10% faster.
git-svn-id: https://pugixml.googlecode.com/svn/trunk@1008 99668b35-9821-0410-8761-19e4c4f06640
|
|
This makes it easier to optimize strconv. For consistency move all definitions of parser-internal macros to one place.
git-svn-id: https://pugixml.googlecode.com/svn/trunk@1007 99668b35-9821-0410-8761-19e4c4f06640
|
|
Also add it to #undef list at the end to avoid conflicts
git-svn-id: https://pugixml.googlecode.com/svn/trunk@1006 99668b35-9821-0410-8761-19e4c4f06640
|